-
$5.00
#5 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, used at the top of taller doors. Sold individually.
- Graduated end hinge with roller carrier, the top end-hinge position on taller doors
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
-
$5.00
#4 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #3. Sold individually.
- Graduated end hinge with roller carrier, one section above the #3
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
-
$5.00
#3 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #2. Sold individually.
- Graduated end hinge with roller carrier, one section above the #2
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
-
$5.00
#2 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, usually the lowest end hinge. Sold individually.
- Graduated end hinge with roller carrier, usually the lowest end-hinge position
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
-
$9.51
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →
-
$55.00
Vertical Tracks Pair 7 ft: a pair of 7 ft galvanized vertical tracks for 7 ft tall sectional doors.
- Material: Galvanized (steel)
- Door Height: 7 ft (tall doors)
- Sold As: 2 (pair)
- Local pickup only from our Sacramento or Santa Clara store
- Browse more in this category
-
$22.00
Torsion Tube 16 ft 9 in: a 16 ft 9 in steel torsion tube for torsion spring garage doors.
- Material: Steel (heavy duty)
- Length: 16′ 9″ (tube)
- Availability: Pickup (local only)
- Local pickup only from our Sacramento or Santa Clara store
- Browse more in this category
-
$8.00
Top Fixture Bracket: the galvanized bracket at each top corner of the door that holds the top roller.
- Material: Galvanized (steel)
- Position: Top (upper corner)
- Sold As: 1 (single bracket)
- Browse more in this category
-
$20.00
Strut 15 ft 11 in: a 15 ft 11 in galvanized steel reinforcement strut for wide garage doors.
- Material: Galvanized (steel)
- Length: 15′ 11″ (for wide doors)
- Availability: Pickup (local only)
- Local pickup only from our Sacramento or Santa Clara store
- Browse more in this category
-
$8.00
Sliding Lock: a steel slide lock that bolts a manually operated garage door shut from the inside.
- Type: Slide bolt (manual)
- Material: Steel (heavy duty)
- Sold As: 1 (lock)
- Browse more in this category
-
$5.00
#1 residential garage door hinge in 14 gauge galvanized steel, the center hinge used along every seam of a sectional door. Sold individually.
- Center hinge for every section seam, the number most doors use the most of
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
-
$12.00
Punched Angle: an 8 ft length of galvanized punched angle used to hang tracks and openers from the ceiling.
- Material: Galvanized (steel)
- Length: 8 ft (96′)
- Availability: Pickup (local only)
- Local pickup only from our Sacramento or Santa Clara store
- Browse more in this category
-
$25.00
ORB Bracket: a galvanized steel ORB bracket used in garage door assembly.
- Material: Galvanized (steel)
- Use: Assembly (door hardware)
- Sold As: 1 (single bracket)
- Browse more in this category
-
$5.00
Jamb Bracket: the galvanized bracket that fastens the vertical track to the door jamb.
- Material: Galvanized (steel)
- Position: Jamb (vertical track)
- Sold As: 1 (single bracket)
- Browse more in this category
-
$20.00
Garage Door Hero Ultra-Quiet Rollers (10-Pack): a 10-pack of ultra-quiet rollers to replace worn, noisy rollers on a sectional door.
- Quantity: 10 (rollers)
- Benefit: Quiet (ultra-quiet)
- Covers: 1 door (most residential)
- Browse more in this category
-
$15.00
Flag Bracket: the bracket that joins the top of the vertical track to the horizontal track and the door jamb.
- Material: Steel (heavy duty)
- Position: Track top (left or right)
- Sold As: 1 (single bracket)
- Browse more in this category
12 ft Cable Drums: a set of steel cable drums for torsion spring garage doors 12 ft high.
- Material: Steel (machined grooves)
- Door Height: 12 ft (door it fits)
- Sold As: Set (left and right)
- Browse more in this category
Garage Door Hero Ultra-Quiet Rollers (10-Pack): a 10-pack of ultra-quiet rollers to replace worn, noisy rollers on a sectional door.
- Quantity: 10 (rollers)
- Benefit: Quiet (ultra-quiet)
- Covers: 1 door (most residential)
- Browse more in this category
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →