-
$60.00
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.243″ wire × 2″ inside diameter × 32″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 243 x 2″ x 32″ left-wound spring (right side) or 243 x 2″ x 32″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$30.00
Single right-wound torsion spring for heavier insulated and double-wide residential doors: 0.243″ wire × 2″ inside diameter × 32″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 243 x 2″ x 32″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$30.00
Single left-wound torsion spring for heavier insulated and double-wide residential doors: 0.243″ wire × 2″ inside diameter × 32″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 243 x 2″ x 32″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$46.00
Standard residential torsion spring pair for standard single and double residential doors: 0.218″ wire × 2″ inside diameter × 24″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 218 x 2″ x 24″ left-wound spring (right side) or 218 x 2″ x 24″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$23.00
Single right-wound torsion spring for standard single and double residential doors: 0.218″ wire × 2″ inside diameter × 24″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 218 x 2″ x 24″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$23.00
Single left-wound torsion spring for standard single and double residential doors: 0.218″ wire × 2″ inside diameter × 24″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 218 x 2″ x 24″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$67.99
LiftMaster 485LM replacement backup battery: a 12V 4.5Ah sealed, non-spillable battery for LiftMaster battery-backup garage door openers.
- 12V, 4.5Ah sealed battery
- Non-spillable, safe to mount overhead
- Keeps a battery-backup opener working in a power outage
- Fits the openers we sell with battery backup, including the 6690L and 6580L
Match the battery model in your opener manual (485LM). Compatibility →
-
$20.00
Single left-wound torsion spring for lighter single-car residential doors: 0.192″ wire × 1.75″ inside diameter × 20″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 192 x 1.75″ x 20″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$20.00
Single right-wound torsion spring for lighter single-car residential doors: 0.192″ wire × 1.75″ inside diameter × 20″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 192 x 1.75″ x 20″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$40.00
Light residential torsion spring pair for lighter single-car residential doors: 0.192″ wire × 1.75″ inside diameter × 20″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 192 x 1.75″ x 20″ left-wound spring (right side) or 192 x 1.75″ x 20″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$1,079.00
9×7 insulated steelback garage door with long raised panels, a single-car size for the most common single-car opening on newer homes.
- Size: 9 ft wide × 7 ft high
- 24 gauge galvanized steel with a baked-on finish for lasting weather resistance
- 2-inch R-10 insulated core for energy efficiency, noise reduction and rigidity
- Long panel style in Almond or White
- Complete package: torsion springs, tube, drums, cables, tracks, rollers, hinges, struts, seals and hardware box
- Local pickup only from our Sacramento or Santa Clara store
Measure your opening before ordering. Will it fit? →
-
$1,079.00
9×7 insulated steelback garage door with short raised panels, a single-car size for the most common single-car opening on newer homes.
- Size: 9 ft wide × 7 ft high
- 24 gauge galvanized steel with a baked-on finish for lasting weather resistance
- 2-inch R-10 insulated core for energy efficiency, noise reduction and rigidity
- Short panel style in Almond or White
- Complete package: torsion springs, tube, drums, cables, tracks, rollers, hinges, struts, seals and hardware box
- Local pickup only from our Sacramento or Santa Clara store
Measure your opening before ordering. Will it fit? →
-
$849.00
9×7 non-insulated steel garage door with long raised panels, a single-car size for the most common single-car opening on newer homes.
- Size: 9 ft wide × 7 ft high
- 24 gauge galvanized steel with a baked-on finish for lasting weather resistance
- Non-insulated, lighter and more economical
- Long panel style in Almond or White
- Complete package: torsion springs, tube, drums, cables, tracks, rollers, hinges, struts, seals and hardware box
- Local pickup only from our Sacramento or Santa Clara store
Measure your opening before ordering. Will it fit? →
-
$849.00
9×7 non-insulated steel garage door with short raised panels, a single-car size for the most common single-car opening on newer homes.
- Size: 9 ft wide × 7 ft high
- 24 gauge galvanized steel with a baked-on finish for lasting weather resistance
- Non-insulated, lighter and more economical
- Short panel style in Almond or White
- Complete package: torsion springs, tube, drums, cables, tracks, rollers, hinges, struts, seals and hardware box
- Local pickup only from our Sacramento or Santa Clara store
Measure your opening before ordering. Will it fit? →
-
$5.00
#5 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, used at the top of taller doors. Sold individually.
- Graduated end hinge with roller carrier, the top end-hinge position on taller doors
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
-
$5.00
#4 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #3. Sold individually.
- Graduated end hinge with roller carrier, one section above the #3
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
12 ft Cable Drums: a set of steel cable drums for torsion spring garage doors 12 ft high.
- Material: Steel (machined grooves)
- Door Height: 12 ft (door it fits)
- Sold As: Set (left and right)
- Browse more in this category
Garage Door Hero Ultra-Quiet Rollers (10-Pack): a 10-pack of ultra-quiet rollers to replace worn, noisy rollers on a sectional door.
- Quantity: 10 (rollers)
- Benefit: Quiet (ultra-quiet)
- Covers: 1 door (most residential)
- Browse more in this category
LiftMaster 878MAX Wireless Keypad: a wireless keypad that opens your garage with a PIN instead of a remote.
- Backlit keys for use at night
- Weather-resistant construction
- Rolling code technology for security
- Compatible with most LiftMaster garage door openers
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
LiftMaster 98022, a wall-mounted jackshaft opener that frees up the ceiling and handles tall, heavy doors.
- Mounts on the wall beside the door and drives the torsion shaft directly, so there is no rail across the ceiling
- Lifts sectional doors up to 850 lbs and 14 ft high
- No cable tension monitor, for easier installation
- Nearly silent and vibration-free operation
Check your door is balanced and choose the right rail length before ordering. Will it fit? →
LiftMaster L993M 3-Button Garage Door Remote: a three-button remote that controls up to three garage doors or gates.
- Controls up to 3 garage doors or gates
- Up to 1,300 ft range, conditions permitting
- Compatible with Chamberlain, LiftMaster and most Craftsman openers made after 1997 with safety sensors
- Set up and manage the remote in the myQ app (openers with a yellow learn button)
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 250 x 1.75″ x 33″ left-wound spring (right side) or 250 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
150 lb garage door extension spring pair with a red color code, for residential doors that use side-mounted extension springs, commonly 8 ft. x 7 ft., 9 ft. x 7 ft., and 16 ft. x 7 ft. doors.
- Rated for garage doors weighing approximately 150 lbs
- Red color code for quick identification
- Double-looped ends for stronger connection points
- Sold as a pair so both sides stay balanced
- Backed by a 5-year warranty
Weigh your door before ordering: the spring rating must match the door weight. How to choose →
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →