-
$60.00
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.243″ wire × 2″ inside diameter × 32″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 243 x 2″ x 32″ left-wound spring (right side) or 243 x 2″ x 32″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$30.00
Single right-wound torsion spring for heavier insulated and double-wide residential doors: 0.243″ wire × 2″ inside diameter × 32″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 243 x 2″ x 32″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$30.00
Single left-wound torsion spring for heavier insulated and double-wide residential doors: 0.243″ wire × 2″ inside diameter × 32″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 243 x 2″ x 32″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$46.00
Standard residential torsion spring pair for standard single and double residential doors: 0.218″ wire × 2″ inside diameter × 24″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 218 x 2″ x 24″ left-wound spring (right side) or 218 x 2″ x 24″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$23.00
Single right-wound torsion spring for standard single and double residential doors: 0.218″ wire × 2″ inside diameter × 24″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 218 x 2″ x 24″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$23.00
Single left-wound torsion spring for standard single and double residential doors: 0.218″ wire × 2″ inside diameter × 24″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 218 x 2″ x 24″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$20.00
Single left-wound torsion spring for lighter single-car residential doors: 0.192″ wire × 1.75″ inside diameter × 20″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 192 x 1.75″ x 20″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$20.00
Single right-wound torsion spring for lighter single-car residential doors: 0.192″ wire × 1.75″ inside diameter × 20″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 192 x 1.75″ x 20″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$40.00
Light residential torsion spring pair for lighter single-car residential doors: 0.192″ wire × 1.75″ inside diameter × 20″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 192 x 1.75″ x 20″ left-wound spring (right side) or 192 x 1.75″ x 20″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$35.50
Single left-wound torsion spring for very heavy residential and light-commercial doors: 0.273″ wire × 1.75″ inside diameter × 40″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Matching opposite spring: 273 x 1.75″ x 40″ right-wound spring
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$35.50
Single right-wound torsion spring for very heavy residential and light-commercial doors: 0.273″ wire × 1.75″ inside diameter × 40″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Matching opposite spring: 273 x 1.75″ x 40″ left-wound spring
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$69.00
Ultra heavy duty torsion spring pair for extra-large residential and light-commercial doors: 0.262″ wire × 1.75″ inside diameter × 37″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 262 x 1.75″ x 37″ left-wound spring (right side) or 262 x 1.75″ x 37″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$34.50
Single left-wound torsion spring for extra-large residential and light-commercial doors: 0.262″ wire × 1.75″ inside diameter × 37″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 262 x 1.75″ x 37″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$34.50
Single right-wound torsion spring for extra-large residential and light-commercial doors: 0.262″ wire × 1.75″ inside diameter × 37″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 262 x 1.75″ x 37″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$65.00
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 250 x 1.75″ x 33″ left-wound spring (right side) or 250 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$32.50
Single left-wound torsion spring for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 250 x 1.75″ x 33″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 250 x 1.75″ x 33″ left-wound spring (right side) or 250 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →