-
$50.07
P928 plug-end garage door extension spring pair, 28 in. long with 0.148 in. No. 9 wire and a 1-1/4 in. outside diameter, for residential doors that use plug-end springs.
- Plug-end extension springs, 28 in. length over coils
- 0.148 in. No. 9 wire, 1-1/4 in. outside diameter
- Supports doors of Up to 75 lbs when used as a pair
- Initial tension 45 to 55 lbs, maximum stretch 18.5 in.
Match the length, wire size and stretch of your old springs. How to choose →
-
$61.58
P728 plug-end garage door extension spring pair, 28 in. long with 0.177 in. No. 7 wire and a 1-5/16 in. outside diameter, for residential doors that use plug-end springs.
- Plug-end extension springs, 28 in. length over coils
- 0.177 in. No. 7 wire, 1-5/16 in. outside diameter
- Supports doors of approximately 90 to 150 lbs when used as a pair
- Initial tension 110 to 120 lbs, maximum stretch 18.5 in.
Match the length, wire size and stretch of your old springs. How to choose →
-
$59.47
P528 plug-end garage door extension spring pair, 28 in. long with 0.207 in. No. 5 wire and a 1-5/8 in. outside diameter, for residential doors that use plug-end springs.
- Plug-end extension springs, 28 in. length over coils
- 0.207 in. No. 5 wire, 1-5/8 in. outside diameter
- Supports doors of approximately 105 to 175 lbs when used as a pair
- Initial tension 135 to 145 lbs, maximum stretch 22 in.
Match the length, wire size and stretch of your old springs. How to choose →
-
$82.59
P328 plug-end garage door extension spring pair, 28 in. long with 0.244 in. No. 3 wire and a 2 in. outside diameter, for residential doors that use plug-end springs.
- Plug-end extension springs, 28 in. length over coils
- 0.244 in. No. 3 wire, 2 in. outside diameter
- Supports doors of approximately 125 to 250 lbs when used as a pair
- Initial tension 165 to 185 lbs, maximum stretch 18.5 in.
Match the length, wire size and stretch of your old springs. How to choose →
-
$35.50
Single left-wound torsion spring for very heavy residential and light-commercial doors: 0.273″ wire × 1.75″ inside diameter × 40″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Matching opposite spring: 273 x 1.75″ x 40″ right-wound spring
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$35.50
Single right-wound torsion spring for very heavy residential and light-commercial doors: 0.273″ wire × 1.75″ inside diameter × 40″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Matching opposite spring: 273 x 1.75″ x 40″ left-wound spring
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$69.00
Ultra heavy duty torsion spring pair for extra-large residential and light-commercial doors: 0.262″ wire × 1.75″ inside diameter × 37″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 262 x 1.75″ x 37″ left-wound spring (right side) or 262 x 1.75″ x 37″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$34.50
Single left-wound torsion spring for extra-large residential and light-commercial doors: 0.262″ wire × 1.75″ inside diameter × 37″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 262 x 1.75″ x 37″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$34.50
Single right-wound torsion spring for extra-large residential and light-commercial doors: 0.262″ wire × 1.75″ inside diameter × 37″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 262 x 1.75″ x 37″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$65.00
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 250 x 1.75″ x 33″ left-wound spring (right side) or 250 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$32.50
Single left-wound torsion spring for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 250 x 1.75″ x 33″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$32.50
Single right-wound torsion spring for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 250 x 1.75″ x 33″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$60.00
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.243″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 243 x 1.75″ x 33″ left-wound spring (right side) or 243 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
-
$30.00
Single left-wound torsion spring for heavier insulated and double-wide residential doors: 0.243″ wire × 1.75″ inside diameter × 33″ length, installed on the right side of the shaft.
- Left-wound, mounts on the right side of the torsion shaft
- Black winding cone, the industry color for a left-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 243 x 1.75″ x 33″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$30.00
Single right-wound torsion spring for heavier insulated and double-wide residential doors: 0.243″ wire × 1.75″ inside diameter × 33″ length, installed on the left side of the shaft.
- Right-wound, mounts on the left side of the torsion shaft
- Red winding cone, the industry color for a right-wound spring
- Oil-tempered spring wire, precision-wound for consistent torque
- Replacing both sides? Get the 243 x 1.75″ x 33″ matched pair instead
Wire size, inside diameter, length and wind direction must all match your old spring. How to measure →
-
$55.00
Standard residential torsion spring pair for standard single and double residential doors: 0.234″ wire × 1.75″ inside diameter × 29″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 234 x 1.75″ x 29″ left-wound spring (right side) or 234 x 1.75″ x 29″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
12 ft Cable Drums: a set of steel cable drums for torsion spring garage doors 12 ft high.
- Material: Steel (machined grooves)
- Door Height: 12 ft (door it fits)
- Sold As: Set (left and right)
- Browse more in this category
Garage Door Hero Ultra-Quiet Rollers (10-Pack): a 10-pack of ultra-quiet rollers to replace worn, noisy rollers on a sectional door.
- Quantity: 10 (rollers)
- Benefit: Quiet (ultra-quiet)
- Covers: 1 door (most residential)
- Browse more in this category
LiftMaster 878MAX Wireless Keypad: a wireless keypad that opens your garage with a PIN instead of a remote.
- Backlit keys for use at night
- Weather-resistant construction
- Rolling code technology for security
- Compatible with most LiftMaster garage door openers
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
LiftMaster 98022, a wall-mounted jackshaft opener that frees up the ceiling and handles tall, heavy doors.
- Mounts on the wall beside the door and drives the torsion shaft directly, so there is no rail across the ceiling
- Lifts sectional doors up to 850 lbs and 14 ft high
- No cable tension monitor, for easier installation
- Nearly silent and vibration-free operation
Check your door is balanced and choose the right rail length before ordering. Will it fit? →
LiftMaster L993M 3-Button Garage Door Remote: a three-button remote that controls up to three garage doors or gates.
- Controls up to 3 garage doors or gates
- Up to 1,300 ft range, conditions permitting
- Compatible with Chamberlain, LiftMaster and most Craftsman openers made after 1997 with safety sensors
- Set up and manage the remote in the myQ app (openers with a yellow learn button)
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 250 x 1.75″ x 33″ left-wound spring (right side) or 250 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
150 lb garage door extension spring pair with a red color code, for residential doors that use side-mounted extension springs, commonly 8 ft. x 7 ft., 9 ft. x 7 ft., and 16 ft. x 7 ft. doors.
- Rated for garage doors weighing approximately 150 lbs
- Red color code for quick identification
- Double-looped ends for stronger connection points
- Sold as a pair so both sides stay balanced
- Backed by a 5-year warranty
Weigh your door before ordering: the spring rating must match the door weight. How to choose →
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →