-
Original price was: $37.50.$30.00Current price is: $30.00.
Hex Winding Bars: a pair of steel winding bars for adjusting and installing torsion springs.
- Material: Steel (high strength)
- Ends: Hex (machined grip)
- Sold As: 2 (pair)
- Browse more in this category
-
$9.00
Garage Door Cables for 8 ft Doors: a pair of galvanized steel lift cables for 8 ft tall garage doors.
- Material: Galvanized (steel wire)
- Door Height: 8 ft (tall doors)
- Sold As: 2 (pair)
- Browse more in this category
-
$30.00
Garage Door Spring Measurement Gauge: a measuring tool for identifying garage door torsion spring wire size.
- Use: Measuring (torsion springs)
- For: DIY + pros (spring sizing)
- Sold As: 1 (gauge)
- Browse more in this category
-
$20.00
Garage Door Hero Ultra-Quiet Rollers (10-Pack): a 10-pack of ultra-quiet rollers to replace worn, noisy rollers on a sectional door.
- Quantity: 10 (rollers)
- Benefit: Quiet (ultra-quiet)
- Covers: 1 door (most residential)
- Browse more in this category
-
$9.00
Garage Door Cables for 7 ft Doors: a pair of galvanized steel lift cables for 7 ft tall garage doors.
- Material: Galvanized (steel wire)
- Door Height: 7 ft (tall doors)
- Sold As: 2 (pair)
- Browse more in this category
-
$15.00
Flag Bracket: the bracket that joins the top of the vertical track to the horizontal track and the door jamb.
- Material: Steel (heavy duty)
- Position: Track top (left or right)
- Sold As: 1 (single bracket)
- Browse more in this category
-
$13.00
End Bearing Pair: the pair of end bearing plates that support each end of the torsion shaft.
- Material: Steel (heavy duty)
- Bearing: Ball (precision)
- Sold As: 2 (pair)
- Browse more in this category
-
$11.00
8 ft Standard Cable Drums: a set of steel cable drums for torsion spring garage doors 8 ft high.
- Material: Steel (machined grooves)
- Door Height: 8 ft (door it fits)
- Sold As: Set (left and right)
- Browse more in this category
-
$18.00
12 ft Cable Drums: a set of steel cable drums for torsion spring garage doors 12 ft high.
- Material: Steel (machined grooves)
- Door Height: 12 ft (door it fits)
- Sold As: Set (left and right)
- Browse more in this category
-
$7.00
Center Anchor Plate: the steel plate that anchors the center of a torsion spring system to the wall above the door.
- Material: Steel (heavy duty)
- Position: Center (above the door)
- Sold As: 1 (single plate)
- Browse more in this category
-
$37.00
T Bottom Seal 16 ft: a 16 ft rubber T-style bottom seal that closes the gap under the garage door.
- Type: T-style (bottom seal)
- Length: 16 ft (cut to fit)
- Material: Rubber (durable)
- Browse more in this category
-
$9.00
Garage Door Bottom Bracket: the bracket at each lower corner of the door that anchors the lift cable and holds the bottom roller.
- Material: Steel (heavy duty)
- Position: Bottom (lower corner)
- Sold As: 1 (single bracket)
- Browse more in this category
-
$38.00
LiftMaster 380UT 2-Button Universal Garage Door Remote: a two-button universal visor remote that works with LiftMaster and most other major opener brands.
- 2 buttons to control up to two garage doors or gates
- Works with LiftMaster, Chamberlain and Craftsman plus Genie, Linear, Stanley and Wayne-Dalton openers
- Supports LiftMaster Security+ and Security+ 2.0 rolling code as well as many dip-switch systems
- Visor clip for easy use from the car
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
12 ft Cable Drums: a set of steel cable drums for torsion spring garage doors 12 ft high.
- Material: Steel (machined grooves)
- Door Height: 12 ft (door it fits)
- Sold As: Set (left and right)
- Browse more in this category
Garage Door Hero Ultra-Quiet Rollers (10-Pack): a 10-pack of ultra-quiet rollers to replace worn, noisy rollers on a sectional door.
- Quantity: 10 (rollers)
- Benefit: Quiet (ultra-quiet)
- Covers: 1 door (most residential)
- Browse more in this category
LiftMaster 878MAX Wireless Keypad: a wireless keypad that opens your garage with a PIN instead of a remote.
- Backlit keys for use at night
- Weather-resistant construction
- Rolling code technology for security
- Compatible with most LiftMaster garage door openers
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
LiftMaster 98022, a wall-mounted jackshaft opener that frees up the ceiling and handles tall, heavy doors.
- Mounts on the wall beside the door and drives the torsion shaft directly, so there is no rail across the ceiling
- Lifts sectional doors up to 850 lbs and 14 ft high
- No cable tension monitor, for easier installation
- Nearly silent and vibration-free operation
Check your door is balanced and choose the right rail length before ordering. Will it fit? →
LiftMaster L993M 3-Button Garage Door Remote: a three-button remote that controls up to three garage doors or gates.
- Controls up to 3 garage doors or gates
- Up to 1,300 ft range, conditions permitting
- Compatible with Chamberlain, LiftMaster and most Craftsman openers made after 1997 with safety sensors
- Set up and manage the remote in the myQ app (openers with a yellow learn button)
- More options in remotes, keypads and wall controls
Check the compatibility notes before ordering. Compatibility →
Heavy residential torsion spring pair for heavier insulated and double-wide residential doors: 0.250″ wire × 1.75″ inside diameter × 33″ length, sold as a matched set of two.
- Ships as a matched left-wound and right-wound pair that covers both sides of the torsion shaft
- ASTM A229 Class II oil-tempered wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? 250 x 1.75″ x 33″ left-wound spring (right side) or 250 x 1.75″ x 33″ right-wound spring (left side)
Measure your existing spring before ordering: wire size, inside diameter, length and wind direction must all match. How to measure →
150 lb garage door extension spring pair with a red color code, for residential doors that use side-mounted extension springs, commonly 8 ft. x 7 ft., 9 ft. x 7 ft., and 16 ft. x 7 ft. doors.
- Rated for garage doors weighing approximately 150 lbs
- Red color code for quick identification
- Double-looped ends for stronger connection points
- Sold as a pair so both sides stay balanced
- Backed by a 5-year warranty
Weigh your door before ordering: the spring rating must match the door weight. How to choose →
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →