Garage Door
Drums
From Just $11.00
Shop Now
What we offer
$5.00
#5 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, used at the top of taller doors. Sold individually.
- Graduated end hinge with roller carrier, the top end-hinge position on taller doors
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#4 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #3. Sold individually.
- Graduated end hinge with roller carrier, one section above the #3
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#3 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #2. Sold individually.
- Graduated end hinge with roller carrier, one section above the #2
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#2 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, usually the lowest end hinge. Sold individually.
- Graduated end hinge with roller carrier, usually the lowest end-hinge position
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$9.51
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →
![LiftMaster G2778 Belt Drive Rail Assembly 8' [RAIL ONLY]](https://legacygaragedepot.com/wp-content/uploads/2026/06/LiftMaster-Belt-Drive-Rail-Assembly-1pc-8ft-All-Security-Equipment-2-300x300.webp)
$112.00
The LiftMaster G2778 is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$36.63
Replace worn or broken garage door extension springs with this 210 lb white garage door extension spring pair. Designed for compatible residential garage doors with an approximate 210 lb door weight, this pair helps restore smooth, balanced garage door operation.
$34.53
Replace worn or broken garage door extension springs with this 180 lb gold garage door extension spring pair. Built with double-looped ends and ASTM 229 Class II oil-tempered high-carbon coated steel, this pair is designed for compatible 16 ft. x 7 ft. residential garage doors with an approximate door weight of 180 lbs.
$32.17
Replace worn or broken garage door extension springs with this 170 lb orange garage door extension spring pair. Built with double-looped ends and heavy-duty oil-tempered wire, this pair is designed for compatible 16 ft. x 7 ft. residential garage doors with an approximate door weight of 170 lbs.
$30.08
Replace worn or broken garage door extension springs with this 160 lb brown garage door extension spring pair. Designed with double-looped ends for added strength, this pair is made for compatible residential garage doors, including 8 ft. x 7 ft., 9 ft. x 7 ft., and 16 ft. x 7 ft. configurations.
$9.51
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →
$26.92
Replace worn or broken garage door extension springs with this 150 lb red garage door extension spring pair. Designed with double-looped ends for added strength, this pair is made for compatible residential garage doors, including 8 ft. x 7 ft., 9 ft. x 7 ft., and 16 ft. x 7 ft. configurations.
$65.00
Heavy-duty torsion spring for the most demanding garage door applications. The 250×1.75×33 specifications deliver maximum lifting capacity for oversized doors and commercial installations. Manufactured with precision-tempered steel for unmatched reliability and longevity.
$39.99
- Compatible with Chamberlain®, LiftMaster® and most Craftsman® garage door openers manufactured after 1997 with safety sensors.
For more information, click here - Up to 1,300 ft. range (conditions permitting).
- New and improved, seamless set up.
- Control up to 3 garage doors or gates.
- NEW! Set up and manage your remote in the myQ app.*
*Requires Chamberlain, LiftMaster or Craftsman garage door opener with a yellow learn button. - Ultra-secure encryption.
$650.00
-
- No cable tension monitor means easier installation.
- Sleek and modern design frees up space in the garage.
- Fast, smooth operation – even for tall and heavy doors. Nearly silent and vibration-free.
- Remote LED lighting gives full garage light coverage. Ability to add up to sixteen 827LM remote work lights.
- Battery backup ensures access in the case of power loss.
-
Includes
- myQ Remote LED Light (827LM) – Operates automatically with the opener and works with the myQ App.
- Integrated Battery Backup (485LM) – Powers up the opener when the power’s out.
- Automatic Garage Door Lock (841LM) – Deadbolts the garage door automatically every time it closes.
- 3-Button Remote Control (893MAX) – Operates up to three garage door openers or myQ Light accessories. Compatible with all LiftMaster Garage Door Openers manufactured since January 1993.
- Smart Control Panel® (880LMW) – LCD display enables simple programming and adjustment of settings.
$58.00
LiftMaster 878MAX wireless keypad designed for convenient garage door access control. Features weather-resistant construction with backlit keys and rolling code technology for enhanced security. Compatible with most LiftMaster garage door openers and not part of any set – sold individually for secure entry access.
$20.00
Garage Door Hero – Ultra-Quiet Rollers (10-Pack)
$18.00
Professional grade 12-foot drums designed for garage door applications. Features heavy-duty steel construction with precision-machined grooves for cable winding. Essential component for proper garage door lifting system operation. Part of the Drums product set for complete door coverage.
- Compatible with most brands of garage door openers manufactured after 1993 with safety sensors.
For more information, click here - Up to 1,300 ft. range (conditions permitting).
- New and improved, seamless set up.
- Control up to 2 garage doors or gates.
- NEW! Set up and manage your remote in the myQ app.*
*Requires Chamberlain, LiftMaster or Craftsman garage door opener with a yellow or white learn button. - Ultra-secure encryption.
- Worry-Free Warranty: Built to last and backed by a 5 year motor and 1 year chain warranty for peace of mind.
- Battery Backup: Keeps your garage working—even when the power goes out.
- Reliable Chain Strength: The DC motor and chain drive system combine for smooth, low-noise performance that delivers reliability and strength.
- Live Garage View: Monitor your garage in real time with a wide-angle camera and the myQ app.
- Frequent Use Power: The 3/4 HP motor* is engineered for frequent use and lasting durability.
- Standard Garage Lighting: Illuminate your garage with dependable built-in lighting for safer, easier access—any time of day.
- myQ Connectivity: Open. Close. Monitor. From anywhere.
-
Includes
- (1) Three-Button Transmitter (L993M) – Operates up to 3 openers or myQ light accessories. Safeguards your home with Security+ 3.0™
- (1) Multi-Function Control Panel (L955W) – Operates the garage door opener
and lights from inside the garage. Allows for fast, easy programming of accessories with a learn button. - (1) Battery Backup (485LM) – Integrated battery backup allows you to open and close your door even when the power is out.
Professional grade hex winding bars designed for torsion spring adjustment and installation. Features high-strength steel construction with precision-machined hex ends for secure grip. Essential tools for garage door professionals and not part of any set – sold as a pair for complete service capability.
Garage Door Torsion Springs
$35.50
Heavy-duty right side garage door torsion spring for residential garage doors. This spring measures 0.273″ wire size x 1.75″ inside diameter x 40″ length and is a left-wound torsion spring, typically installed on the right side of the torsion tube when viewed from inside the garage looking out.
$35.50
Heavy-duty left side garage door torsion spring replacement for residential garage doors. This spring measures 0.273″ wire size x 1.75″ inside diameter x 40″ length and is a right-wound torsion spring, typically installed on the left side of the torsion tube when viewed from inside the garage looking out. Features a red cone color for quick identification.
$69.00
Ultra-heavy-duty torsion spring pair for extra-large residential and light-commercial garage doors — 0.262″ wire × 1.75″ inside diameter × 37″ length, sold as a matched set of two.
- Ships as a matched left-wound + right-wound pair — covers both sides of the torsion shaft
- Oil-tempered spring wire, precision-wound for consistent torque
- Replaces both springs at once to keep the door balanced
- Need one side only? right-side and left-side springs sold individually
Measure your existing spring before ordering — wire size, inside diameter, length and wind direction must all match. How to measure →
$34.50
Heavy-duty right side garage door torsion spring for residential garage doors. This spring measures 0.262″ wire size x 1.75″ inside diameter x 37″ length and is a left-wound torsion spring, typically installed on the right side of the torsion tube when viewed from inside the garage looking out.
$34.50
Heavy-duty left side garage door torsion spring replacement for residential garage doors. This spring measures 0.262″ wire size x 1.75″ inside diameter x 37″ length and is a right-wound torsion spring, typically installed on the left side of the torsion tube when viewed from inside the garage looking out. Features a red cone color for quick identification.
$65.00
Heavy-duty torsion spring for the most demanding garage door applications. The 250×1.75×33 specifications deliver maximum lifting capacity for oversized doors and commercial installations. Manufactured with precision-tempered steel for unmatched reliability and longevity.
$32.50
Heavy-duty right side garage door torsion spring for residential garage doors. This spring measures 0.250″ wire size x 1.75″ inside diameter x 33″ length and is a left-wound torsion spring, typically installed on the right side of the torsion tube when viewed from inside the garage looking out.
$32.50
Heavy-duty left side garage door torsion spring replacement for residential garage doors. This spring measures 0.250″ wire size x 1.75″ inside diameter x 33″ length and is a right-wound torsion spring, typically installed on the left side of the torsion tube when viewed from inside the garage looking out. Features a red cone color for quick identification.
$60.00
Premium torsion spring engineered for large residential and light commercial garage doors. This 243×1.75×33 spring offers enhanced torque capacity with its extended length and optimized wire gauge. Built to withstand thousands of cycles with minimal maintenance.
$30.00
Heavy-duty right side garage door torsion spring for residential garage doors. This spring measures 0.243″ wire size x 1.75″ inside diameter x 33″ length and is a left-wound torsion spring, typically installed on the right side of the torsion tube when viewed from inside the garage looking out.
$5.00
#5 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, used at the top of taller doors. Sold individually.
- Graduated end hinge with roller carrier, the top end-hinge position on taller doors
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#4 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #3. Sold individually.
- Graduated end hinge with roller carrier, one section above the #3
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#3 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #2. Sold individually.
- Graduated end hinge with roller carrier, one section above the #2
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#2 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, usually the lowest end hinge. Sold individually.
- Graduated end hinge with roller carrier, usually the lowest end-hinge position
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$9.51
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →
$55.00
Professional grade 7-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$22.00
Professional grade 16 foot 9 inch tube designed for garage door applications. Features heavy-duty steel construction with precision-machined dimensions for reliable performance. Essential component for garage door assembly and not part of any set – sold individually for specific installation requirements.
$8.00
Heavy-duty top fixture bracket designed for garage door mounting applications. Features durable galvanized steel construction with precision-engineered attachment points for secure installation. Essential component for proper garage door top assembly and not part of any set – sold individually for specific mounting needs.
$20.00
Professional grade 15 foot 11 inch strut designed for garage door reinforcement applications. Features heavy-duty galvanized steel construction for superior strength and durability. Essential component for large garage door installations and not part of any set – sold individually for specific reinforcement needs.
$8.00
Heavy-duty sliding lock designed for garage door security applications. Features durable steel construction with smooth sliding mechanism for reliable operation. Essential component for manual garage door security and not part of any set – sold individually for specific security needs.
Garage Door Openers/Rails
$112.00
The LiftMaster G2778 is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$89.00
The LiftMaster G2777 is a one-piece 7 feet (2.1m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
![LiftMaster G1707 Chain Drive Rail 7' [RAIL ONLY]](https://legacygaragedepot.com/wp-content/uploads/2026/06/LiftMaster-Chain-Drive-Rail-Assembly-1pc-7ft.-All-Security-Equipment-1-1-300x300.webp)
$80.00
The LiftMaster G1707 is a one-piece 7-feet (2.1m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
![LiftMaster G3707CH Chain Drive Rail 7' [RAIL ONLY]](https://legacygaragedepot.com/wp-content/uploads/2026/06/LiftMaster-Chain-Drive-Rail-Assembly-1pc-10ft-All-Security-Equipment-1-300x300.webp)
$150.00
The LiftMaster G3707CH is a one-piece 7 feet (2.1m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$180.00
The LiftMaster G3708CH is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$245.00
The LiftMaster G3710CH is a one-piece 10 feet (3m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
![LiftMaster G1708 Chain Drive Rail 8' [RAIL ONLY]](https://legacygaragedepot.com/wp-content/uploads/2026/06/g170_9229cc72-faa3-478c-a147-7b92db669234-300x300.webp)
$110.00
The LiftMaster G1708 is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$350.00
- Worry-Free Warranty: Built to last and backed by a 6 year motor and belt warranty for peace of mind.
- Battery Backup: Keeps your garage working—even when the power goes out.
- Ultra-Quiet Belt Drive: Engineered for quiet, these openers are powered by DC motors and reinforced belts that glide the door with minimal noise—perfect for homes with living spaces near the garage.
- All-Day Visibility: The 360° camera with adjustable wide-angle and full night vision lets you see every corner of your garage – day or night.
- Frequent Use Power: Engineered for higher-cycle homes, LiftMaster’s DC motor delivers lift capacity similar to a 1 HP AC motor*—with smooth, consistent strength designed to last.
*For comparison only. DC motor lift capacity is not measured in HP. - Dual LED Lighting: Brighter, wider coverage—no dark corners.
- myQ Connectivity: With the myQ app, control and monitor your garage from anywhere, anytime.
-
Includes
- (1) Three-Button Transmitter (L993M) – Operates up to 3 openers or myQ light accessories. Safeguards your home with Security+ 3.0™.
- (1) Motion-Detection Control Panel (L957W) – Motion-detecting control panel
turns on the garage door opener lights as soon as you walk in. - (1) Battery Backup (485LM) – Integrated battery backup allows you to open and close your door even when the power is out.
$650.00
-
- No cable tension monitor means easier installation.
- Sleek and modern design frees up space in the garage.
- Fast, smooth operation – even for tall and heavy doors. Nearly silent and vibration-free.
- Remote LED lighting gives full garage light coverage. Ability to add up to sixteen 827LM remote work lights.
- Battery backup ensures access in the case of power loss.
-
Includes
- myQ Remote LED Light (827LM) – Operates automatically with the opener and works with the myQ App.
- Integrated Battery Backup (485LM) – Powers up the opener when the power’s out.
- Automatic Garage Door Lock (841LM) – Deadbolts the garage door automatically every time it closes.
- 3-Button Remote Control (893MAX) – Operates up to three garage door openers or myQ Light accessories. Compatible with all LiftMaster Garage Door Openers manufactured since January 1993.
- Smart Control Panel® (880LMW) – LCD display enables simple programming and adjustment of settings.
$455.00
- Worry-Free Warranty: Built to last and backed by a lifetime motor and belt warranty for total peace of mind.
- Battery Backup: With built-in Battery Backup, your garage door continues working – so you’re never locked out when it matters most.
- Ultra-Quiet Performance: Engineered for quiet, these openers are powered by DC motors and reinforced belts that glide the door with minimal noise—perfect for homes with living spaces near the garage.
- All-Day Visibility: The 360° camera with adjustable wide-angle and full night vision lets you see every corner of your garage – day or night.
- Heavy-Duty Performance: LiftMaster’s 1¼ HP* equivalent motor is designed for high-use garages and harsh conditions.
*For comparison only. DC motor lift capacity is not measured in HP. - 360° LED Lighting: Brightens your garage from every angle.
- myQ Connectivity: With the myQ app, control and monitor your garage from anywhere, anytime.
-
Includes
- (2) Three-Button Transmitter (L993M) – Operates up to 3 openers or myQ light accessories. Safeguards your home with Security+ 3.0™.
- (1) Smart Control Panel (L958W) – Displays time and temperature, allows for easy programming, and automatically activates the light when you enter the garage.
- (1) Wireless Keypad (L979M) – Enjoy convenient, secure entry to your garage without a remote or key. Installs easily—no additional wiring needed.
- (1) Battery Backup (485LM) – Integrated battery backup allows you to open and close your door even when the power is out.
$112.00
The LiftMaster G2778 is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$89.00
The LiftMaster G2777 is a one-piece 7 feet (2.1m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$80.00
The LiftMaster G1707 is a one-piece 7-feet (2.1m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$150.00
The LiftMaster G3707CH is a one-piece 7 feet (2.1m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$180.00
The LiftMaster G3708CH is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$245.00
The LiftMaster G3710CH is a one-piece 10 feet (3m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$110.00
The LiftMaster G1708 is a one-piece 8 feet (2.4m) Rail Assembly. This complete rail is used to install various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers. Check the manual for specific rail kit information before ordering to ensure compatibility.
$350.00
- Worry-Free Warranty: Built to last and backed by a 6 year motor and belt warranty for peace of mind.
- Battery Backup: Keeps your garage working—even when the power goes out.
- Ultra-Quiet Belt Drive: Engineered for quiet, these openers are powered by DC motors and reinforced belts that glide the door with minimal noise—perfect for homes with living spaces near the garage.
- All-Day Visibility: The 360° camera with adjustable wide-angle and full night vision lets you see every corner of your garage – day or night.
- Frequent Use Power: Engineered for higher-cycle homes, LiftMaster’s DC motor delivers lift capacity similar to a 1 HP AC motor*—with smooth, consistent strength designed to last.
*For comparison only. DC motor lift capacity is not measured in HP. - Dual LED Lighting: Brighter, wider coverage—no dark corners.
- myQ Connectivity: With the myQ app, control and monitor your garage from anywhere, anytime.
-
Includes
- (1) Three-Button Transmitter (L993M) – Operates up to 3 openers or myQ light accessories. Safeguards your home with Security+ 3.0™.
- (1) Motion-Detection Control Panel (L957W) – Motion-detecting control panel
turns on the garage door opener lights as soon as you walk in. - (1) Battery Backup (485LM) – Integrated battery backup allows you to open and close your door even when the power is out.
$650.00
-
- No cable tension monitor means easier installation.
- Sleek and modern design frees up space in the garage.
- Fast, smooth operation – even for tall and heavy doors. Nearly silent and vibration-free.
- Remote LED lighting gives full garage light coverage. Ability to add up to sixteen 827LM remote work lights.
- Battery backup ensures access in the case of power loss.
-
Includes
- myQ Remote LED Light (827LM) – Operates automatically with the opener and works with the myQ App.
- Integrated Battery Backup (485LM) – Powers up the opener when the power’s out.
- Automatic Garage Door Lock (841LM) – Deadbolts the garage door automatically every time it closes.
- 3-Button Remote Control (893MAX) – Operates up to three garage door openers or myQ Light accessories. Compatible with all LiftMaster Garage Door Openers manufactured since January 1993.
- Smart Control Panel® (880LMW) – LCD display enables simple programming and adjustment of settings.
$455.00
- Worry-Free Warranty: Built to last and backed by a lifetime motor and belt warranty for total peace of mind.
- Battery Backup: With built-in Battery Backup, your garage door continues working – so you’re never locked out when it matters most.
- Ultra-Quiet Performance: Engineered for quiet, these openers are powered by DC motors and reinforced belts that glide the door with minimal noise—perfect for homes with living spaces near the garage.
- All-Day Visibility: The 360° camera with adjustable wide-angle and full night vision lets you see every corner of your garage – day or night.
- Heavy-Duty Performance: LiftMaster’s 1¼ HP* equivalent motor is designed for high-use garages and harsh conditions.
*For comparison only. DC motor lift capacity is not measured in HP. - 360° LED Lighting: Brightens your garage from every angle.
- myQ Connectivity: With the myQ app, control and monitor your garage from anywhere, anytime.
-
Includes
- (2) Three-Button Transmitter (L993M) – Operates up to 3 openers or myQ light accessories. Safeguards your home with Security+ 3.0™.
- (1) Smart Control Panel (L958W) – Displays time and temperature, allows for easy programming, and automatically activates the light when you enter the garage.
- (1) Wireless Keypad (L979M) – Enjoy convenient, secure entry to your garage without a remote or key. Installs easily—no additional wiring needed.
- (1) Battery Backup (485LM) – Integrated battery backup allows you to open and close your door even when the power is out.
- Worry-Free Warranty: Built to last and backed by a 5 year motor and 1 year chain warranty for peace of mind.
- Battery Backup: Keeps your garage working—even when the power goes out.
- Reliable Chain Strength: The DC motor and chain drive system combine for smooth, low-noise performance that delivers reliability and strength.
- Live Garage View: Monitor your garage in real time with a wide-angle camera and the myQ app.
- Frequent Use Power: The 3/4 HP motor* is engineered for frequent use and lasting durability.
- Standard Garage Lighting: Illuminate your garage with dependable built-in lighting for safer, easier access—any time of day.
- myQ Connectivity: Open. Close. Monitor. From anywhere.
-
Includes
- (1) Three-Button Transmitter (L993M) – Operates up to 3 openers or myQ light accessories. Safeguards your home with Security+ 3.0™
- (1) Multi-Function Control Panel (L955W) – Operates the garage door opener
and lights from inside the garage. Allows for fast, easy programming of accessories with a learn button. - (1) Battery Backup (485LM) – Integrated battery backup allows you to open and close your door even when the power is out.
Garage Door Hardware
$5.00
#5 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, used at the top of taller doors. Sold individually.
- Graduated end hinge with roller carrier, the top end-hinge position on taller doors
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#4 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #3. Sold individually.
- Graduated end hinge with roller carrier, one section above the #3
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#3 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #2. Sold individually.
- Graduated end hinge with roller carrier, one section above the #2
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#2 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, usually the lowest end hinge. Sold individually.
- Graduated end hinge with roller carrier, usually the lowest end-hinge position
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$9.51
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →
$55.00
Professional grade 7-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$22.00
Professional grade 16 foot 9 inch tube designed for garage door applications. Features heavy-duty steel construction with precision-machined dimensions for reliable performance. Essential component for garage door assembly and not part of any set – sold individually for specific installation requirements.
$8.00
Heavy-duty top fixture bracket designed for garage door mounting applications. Features durable galvanized steel construction with precision-engineered attachment points for secure installation. Essential component for proper garage door top assembly and not part of any set – sold individually for specific mounting needs.
$20.00
Professional grade 15 foot 11 inch strut designed for garage door reinforcement applications. Features heavy-duty galvanized steel construction for superior strength and durability. Essential component for large garage door installations and not part of any set – sold individually for specific reinforcement needs.
$8.00
Heavy-duty sliding lock designed for garage door security applications. Features durable steel construction with smooth sliding mechanism for reliable operation. Essential component for manual garage door security and not part of any set – sold individually for specific security needs.
$5.00
#5 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, used at the top of taller doors. Sold individually.
- Graduated end hinge with roller carrier, the top end-hinge position on taller doors
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#4 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #3. Sold individually.
- Graduated end hinge with roller carrier, one section above the #3
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#3 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, one section above the #2. Sold individually.
- Graduated end hinge with roller carrier, one section above the #2
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$5.00
#2 residential garage door hinge in 14 gauge galvanized steel, a graduated end hinge that carries the door roller, usually the lowest end hinge. Sold individually.
- Graduated end hinge with roller carrier, usually the lowest end-hinge position
- 14 gauge steel for a rigid, quiet joint between door sections
- Galvanized finish to resist rust in the garage
- Need a different number? See all garage door hinges, #1 to #5
Match the number stamped on the hinge you are replacing. How to find your hinge number →
$9.51
Heavy-duty steel W-hooks for one-piece garage door springs, sold as a 2-pack with L-plates and keeper rings. They connect the springs on a one-piece (tilt-up) garage door to the door’s lifting hardware.
- 2 complete sets, each with a W-hook, L-plate and keeper ring
- Fits plug, lock-end and clip-end springs
- Heavy-duty steel, 120 lb maximum load per the manufacturer rating
- Each spring pair uses two hooks, one at the top and one at the bottom
Made for one-piece (tilt-up) doors, not sectional doors. Check the fit →
$55.00
Professional grade 7-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$22.00
Professional grade 16 foot 9 inch tube designed for garage door applications. Features heavy-duty steel construction with precision-machined dimensions for reliable performance. Essential component for garage door assembly and not part of any set – sold individually for specific installation requirements.
$8.00
Heavy-duty top fixture bracket designed for garage door mounting applications. Features durable galvanized steel construction with precision-engineered attachment points for secure installation. Essential component for proper garage door top assembly and not part of any set – sold individually for specific mounting needs.
$20.00
Professional grade 15 foot 11 inch strut designed for garage door reinforcement applications. Features heavy-duty galvanized steel construction for superior strength and durability. Essential component for large garage door installations and not part of any set – sold individually for specific reinforcement needs.
$8.00
Heavy-duty sliding lock designed for garage door security applications. Features durable steel construction with smooth sliding mechanism for reliable operation. Essential component for manual garage door security and not part of any set – sold individually for specific security needs.
Garage Door Parts & Accessories
$40.00
Garage door service bundle including a winding bar, nylon center bearing, and work gloves. A practical kit for garage door technicians, installers, and contractors working on torsion spring systems, repairs, and installation jobs.
$5.00
High-quality steel bushing designed for garage door applications. Features durable steel construction that provides smooth operation and long-lasting performance. Essential component for proper garage door function and not part of any set – sold individually for specific replacement needs.
$20.00
Bulk pack of 12 pairs of Legacy Garage Door Supply work gloves for only $20. Comfortable black work gloves with coated grip, red trim, and branded logo — perfect for garage door technicians, installers, contractors, and warehouse teams.
$60.00
Professional grade 8-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$55.00
Professional grade 7-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$3.00
High-quality nylon bushing designed for garage door applications. Features durable nylon construction that provides smooth operation and long-lasting performance. Essential component for proper garage door function and not part of any set – sold individually for specific replacement needs.
$9.00
Professional grade 8-foot garage door cable pair designed for residential and commercial applications. Features high-strength galvanized steel wire construction with precision-formed loops for secure attachment. Essential component for proper garage door lifting system operation. Sold as a pair for complete door coverage.
$9.00
Professional grade 7-foot garage door cable pair designed for residential and commercial applications. Features high-strength galvanized steel wire construction with precision-formed loops for secure attachment. Essential component for proper garage door lifting system operation. Sold as a pair for complete door coverage.
$37.00
Professional grade 16-foot bottom seal designed for garage door weather protection. Features durable rubber construction that provides excellent sealing against weather, debris, and pests. Essential component for energy efficiency and garage protection and not part of any set – sold individually for specific replacement needs.
$9.00
Professional grade bottom bracket designed for garage door applications. Features heavy-duty steel construction with precision-engineered mounting points and roller assembly for smooth operation. Essential component for proper garage door function and not part of any set – sold individually for specific replacement needs.
$40.00
Garage door service bundle including a winding bar, nylon center bearing, and work gloves. A practical kit for garage door technicians, installers, and contractors working on torsion spring systems, repairs, and installation jobs.
$5.00
High-quality steel bushing designed for garage door applications. Features durable steel construction that provides smooth operation and long-lasting performance. Essential component for proper garage door function and not part of any set – sold individually for specific replacement needs.
$20.00
Bulk pack of 12 pairs of Legacy Garage Door Supply work gloves for only $20. Comfortable black work gloves with coated grip, red trim, and branded logo — perfect for garage door technicians, installers, contractors, and warehouse teams.
$60.00
Professional grade 8-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$55.00
Professional grade 7-foot vertical tracks pair designed for garage door applications. Features heavy-duty galvanized steel construction with precision-engineered guide channels for smooth door operation. Essential component for proper garage door alignment and movement. Part of the Vertical Tracks product set for complete door coverage.
$3.00
High-quality nylon bushing designed for garage door applications. Features durable nylon construction that provides smooth operation and long-lasting performance. Essential component for proper garage door function and not part of any set – sold individually for specific replacement needs.
$9.00
Professional grade 8-foot garage door cable pair designed for residential and commercial applications. Features high-strength galvanized steel wire construction with precision-formed loops for secure attachment. Essential component for proper garage door lifting system operation. Sold as a pair for complete door coverage.
$9.00
Professional grade 7-foot garage door cable pair designed for residential and commercial applications. Features high-strength galvanized steel wire construction with precision-formed loops for secure attachment. Essential component for proper garage door lifting system operation. Sold as a pair for complete door coverage.
$37.00
Professional grade 16-foot bottom seal designed for garage door weather protection. Features durable rubber construction that provides excellent sealing against weather, debris, and pests. Essential component for energy efficiency and garage protection and not part of any set – sold individually for specific replacement needs.
$9.00
Professional grade bottom bracket designed for garage door applications. Features heavy-duty steel construction with precision-engineered mounting points and roller assembly for smooth operation. Essential component for proper garage door function and not part of any set – sold individually for specific replacement needs.
Featured Products
Top Selling Products
LiftMaster 2420L 3/4 HPs WiFi DC Chain Drive Battery Backup - HEAD ONLY
$397.50 Original price was: $397.50.$318.00Current price is: $318.00.
On Sale Products
LiftMaster 2-Button Universal Remote L992U
$46.00 Original price was: $46.00.$38.00Current price is: $38.00.
LiftMaster 2420L 3/4 HPs WiFi DC Chain Drive Battery Backup - HEAD ONLY
$397.50 Original price was: $397.50.$318.00Current price is: $318.00.
Hex Winding Bars - Professional Garage Door Tools
$37.50 Original price was: $37.50.$30.00Current price is: $30.00.
Fast Delivery
For all Orders
Discount
20% Discount Available
Secure payment
100% secure payment
Help Center
24/7 Support System